Tremco Spectrem 1 Ultra Low Modulus Silicone Joint Sealant - 20.3 Fluid Ounce Sausage
- 20.3 fluid ounce sausage
- Ultra low-modulus
- High-performing silicone sealer
- One-part application
- Moisture-curing silicone joint sealant
- Greenguard Gold certified
- Case quantity: 15 sausages
- Pallet quantity: 66 cases
- 990 sausages per pallet
Product Overview
Tremco Spectrem 1 is an ultra low-modulus, high-performance, one-part, moisture-curing silicone joint sealant. Tremco Spectrem 1 silicone sealant has excellent physical properties that makes it an ideal joint caulk for sealing the most challenging and vigorously moving joints. These type of joints include materials having a high number of linear expansion such as aluminum curtainwalls, precast concrete panels, metal panels and window perimeters. Tremco Spectrem 1 silicone sealer is formulated for expansion, control, lap joints, and EIFS (exterior Insulation and finish system) applications. Application of Tremco Spectrem 1 is easy and can be used with all types of caulking guns. Just fill the target joint completely and start tooling. At 75 degrees F and 50% relative humidity, a tough skin will begin to form within 10 to 30 minutes. Tremco Spectrem 1 is Greenguard Gold certification which ensures safety for use in the most sensitive indoor environments including hospitals and schools.
Applications
- For most demanding dynamically moving joints
- Door and window perimeters
- Expansion joints
- EIFS
- Vinyl and plastics
- For difficult to adhere substrates
- Curtainwalls
- Flashing
- Sidings
- Poured concrete
- Precast concrete panels
- Cast-in-place / tilt-up
- CMU block
- Natural stone
- Glass
- Wood
- Cap, heel and toe bead
- Metal panels
- Weathersealing from temperature extremes, driving rain, ozone and ultra-violet light
- For safeguardibg against water penetration
- Detailing over ExoAir Barrier systems which ensures a tight seal
Limitations
- No to be applied to damp or contaminated surfaces.
- Always use with adequate ventilation.
- Not intended for continuous water immersion.
Additional Resources
Selection
SKU | Color | Case Qty |
---|---|---|
946802385 | Black | 15 |
946851385 | Aluminum Stone | 15 |
946878385 | Anodized Aluminum | 15 |
946801385 | Bronze | 15 |
946853385 | Gray | 15 |
946805385 | Limestone | 15 |
946803385 | Off-White | 15 |
946806385 | White | 15 |
946857385 | Dark Bronze | 15 |
946807385 | Buff | 15 |
946877385 | Rustic Brick | 15 |
946858385 | Ivory | 15 |
946811385 | Precast White | 15 |
946881385 | Sandstone | 15 |
946861385 | Adobe Tan | 15 |
946875385 | Champagne | 15 |
946809385 | Light Bronze | 15 |
Product Specifications
Brand | Tremco |
---|---|
Series | Spectrem 1 |
Container Size | 20.3 fl. oz. |
Container Type | Sausage |
Indoor / Outdoor usage | Both |
Tack-free time | 30 - 60 minutes |
Tooling time - skin formation | 10 - 20 minutes |
Curing time | 7 - 14 days |
Full adhesion time | 14 - 21 days |
Extension | Plus 100 |
Hardness (shore A) | Plus 15 |
Tear strength | .7kN/M |
Tensile strength @ 100% elongation | .24 MPa |
Tensile strength @ maximum elongation | 1.38 MPa |
Stan and color change | None |
Shelf life | 12 months |
Applicable Standards
Spectrem 1 meets or exceeds the requirements of the following specifications:
- ASTM C920 Type S, Grade NS, Class 100/50, Use NT, M, G, A and O
- ASTM C1248
- ASTM C1382
- ASTM E84
- U.S. Federal Specification TT-S-001543A (COM-NBS) Class A
- U.S. Federal Specification TT-S-00230C (COM-NBS) Class A, Type II
- CAN/CGSB 19.13-M87, MCG-2-40-B-N
- EIMA Test Method 300.01
Spectrem 1 has been tested as a component of several wall assemblies meeting ASTM E2357, the Standard Test Method for Determining Air Leakage of Air Barrier Assemblies, and NFPA 285, the Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior NonLoad-Bearing Wall Assemblies Containing Combustible Components.