- Clean and dry the surface target area
- Remove cap and cut nozzle to desired opening size and puncture the inner seal
- For a smooth seal appearance, angle the cartridge gun at 45 degrees and push the silicone sealant ahead of the tip
- Complete application within 5 minutes
- Be sure to remove any excess sealant immediately using a dry paper towel
- After the curing process has taken place, trim out any unwanted sealant with a sharp cutting blade making sure to avoid undercutting the seal
- Replace cap onto nozzle tip and store below 90 degrees in a dry area
Caution: Since this product contains a fungicide, it is not recommended for usage on aquariums
